1100 Watts Max Power, 2/4 Ohm Stable, Class A/B, Mosfet Power Supply, Remote Subwoofer Control – BOSS Audio Systems R1100M Monoblock Car Amplifier

#ad
BOSS AUDIO R1100M #ad - This powerful 2-ohm stable amplifier features 1100 Watts Max Power with a MOSFET power supply to rock your tunes. For further product details, please scroll down. You will use the Low-pass filter to primarily keep high notes out of your subwoofers. Low level inputs: line level inputs, also known as rca inputs or low-level inputs, use RCA interconnect cables to link the R1100M with the source unit.

It can be installed in a variety of different places due to its' slim and compact design. Max power output of 550 Watts at 4 Ohms into one Channel. Power: maximum power output of 1100 watts at 2 ohms into one channel. Speaker level inputs will be used to connect the R1100M to your factory radio or an aftermarket radio that does not have low-level RCA inputs.

1100 Watts Max Power, 2/4 Ohm Stable, Class A/B, Mosfet Power Supply, Remote Subwoofer Control - BOSS Audio Systems R1100M Monoblock Car Amplifier #ad - Amplifiers in the riot series are perfect for first time car audio buyers looking to add Bass, enhanced sound and performance to their system at an affordable price. Variable bass boost: variable Bass Boost allows you to adjust the low bass within the boost range to just the way you like it. Shift your audio experience up a gear with the Boss Audio Riot R1100M Class A/B Monoblock Amplifier.

Drive up the beat with the Boss Audio R1100M. High level inputs: speaker level inputs are commonly referred to as high-level inputs.

More information about BOSS AUDIO R1100M #ad

A Car Amplifier Wiring Kit Helps You Make Connections and Brings Power to Your Radio, Subwoofers and Speakers - BOSS Audio Systems KIT2 8 Gauge Amplifier Installation Wiring Kit

#ad
BOSS AUDIO KIT-2 #ad - 5/16" ring terminals, 1/4" Ring Terminals, 4 Speaker Terminals. 20 4" wire ties, 3 Rubber Grommets. 16 foot / 18 gauge blue turn-on wire, 30 Foot / 16 Gauge Speaker Wire. 8 gauge amplifier installation kit includes: 20 foot / 8 gauge red power Cable, High Quality Competition Fuse Holder. 3 foot - 8 gauge Black Ground Cable.

. 20 foot high performance RCA Interconnect, 6 Foot Split Loom Tubing.

More information about BOSS AUDIO KIT-2 #ad


Similar products



MTX Audio Terminator Series TNE212D 1,200-Watt Dual 12-Inch Sub Enclosure

#ad
MTX TNE212D #ad - 3 foot - 8 gauge Black Ground Cable. 5/8" mdf construction. 800 watt max dual 12" terminator series loaded subwoofer Bass Enclosure 20 foot / 8 gauge red power Cable, High Quality Competition Fuse Holder. 16 foot / 18 gauge blue turn-on wire, 30 Foot / 16 Gauge Speaker Wire. Houses two 12-inch terminator subwoofers, TNP212D2, or a vented enclosure.

20 foot high performance RCA Interconnect, 6 Foot Split Loom Tubing. Frequency response: 10Hz - 150Hz. Combines the sleek looks and power of a Terminator mono block amplifier with either a sealed enclosure. Ideal solutions for anyone looking to add bass to their vehicle. 20 4" wire ties, 3 Rubber Grommets. Frequency response: 10hz - 150Hz.

MTX Audio Terminator Series TNE212D 1,200-Watt Dual 12-Inch Sub Enclosure #ad - Aviation Grade Carpet. Embroidered terminator Logo; Impedance: 2Ω. 5/16" ring terminals, 1/4" Ring Terminals, 4 Speaker Terminals. Ruggedly constructed using 5/8" MDF and aviation grade black carpet.

More information about MTX TNE212D #ad


Similar products



Pioneer TS-SWX2502 10 inch Shallow-Mount Pre-Loaded Enclosure

#ad
Pioneer TSSWX2502 #ad - Music power nominal: 1, 200 w 300 w frequency Response: 20 Hz to 200 Hz. Avoid installing in areas that are unstable or subject to frequent vibration. 20 foot / 8 gauge red power Cable, High Quality Competition Fuse Holder. 20 foot high performance RCA Interconnect, 6 Foot Split Loom Tubing. 16 foot / 18 gauge blue turn-on wire, 30 Foot / 16 Gauge Speaker Wire.

Combines the sleek looks and power of a Terminator mono block amplifier with either a sealed enclosure. Ideal solutions for anyone looking to add bass to their vehicle. Ruggedly constructed using 5/8" MDF and aviation grade black carpet. Pioneer ts-swx2502 10 inch Shallow-Mount Pre-Loaded Enclosure. Embroidered terminator Logo; Impedance: 2Ω.

Pioneer TS-SWX2502 10 inch Shallow-Mount Pre-Loaded Enclosure #ad - Music power nominal: 1, 200 w 400 w frequency response: 20 hz to 125 hz, impedance: single 4Ω tight bass from a shallow compact design, sensitivity 1 w/1 m: 93 db, Reinforced MICA injection-molded resin preloaded subwoofer cone. Aviation Grade Carpet. 20 4" wire ties, 3 Rubber Grommets. Frequency response: 10hz - 150Hz.

. Frequency response: 10Hz - 150Hz.

More information about Pioneer TSSWX2502 #ad


Similar products



SoundBox Connected 4 Gauge Amp Kit Amplifier Install Wiring Complete 4 Ga Installation Cables 2200W

#ad
SoundBox Connected ECK4 #ad - Combines the sleek looks and power of a Terminator mono block amplifier with either a sealed enclosure. General features:  2300 watts peak power rating complete 4 gauge amp install kit heat resistant wire jacket premium heat durability in-line agu fuse holder triple shielded rca interconnect cable premium grade cables   what's included:  4 gauge red cca copper clad aluminum power Wire: 17 Feet 4 Gauge Black CCA Copper Clad Aluminum Ground Wire: 3 Feet Black/White RCA Interconnect: 17 Feet 16 Gauge Brown/Silver Speaker Wire: 17 Feet 18 Gauge Blue Remote Wire: 18 Feet Protective Black Wire Loom Inline AGU Fuse Holder 80 Amp AGU Fuse Installation Accessories/ Connectors Terminals, Wire Ties and Wire Loom Included Authorized Internet Retailer 1 Year Manufacturer's Warranty Please Note:  Bulk Packaged.

Houses two 12-inch terminator subwoofers, TNP212D2, or a vented enclosure. Frequency response: 10Hz - 150Hz. Ideal solutions for anyone looking to add bass to their vehicle. Set to international standards. 20 foot / 8 gauge red power Cable, High Quality Competition Fuse Holder. Installation accessories/ Connectors / Terminals, Wire Ties and Wire Loom Included.

SoundBox Connected 4 Gauge Amp Kit Amplifier Install Wiring Complete 4 Ga Installation Cables 2200W #ad - 5/16" ring terminals, 1/4" Ring Terminals, 4 Speaker Terminals. Embroidered terminator Logo; Impedance: 2Ω. 3 foot - 8 gauge Black Ground Cable.

More information about SoundBox Connected ECK4 #ad


Similar products



BOSS Audio Systems KIT10 4 Gauge Amplifier Installation Wiring Kit - A Car Amplifier Wiring Kit Helps You Make Connections and Brings Power to Your Radio, Subwoofers and Speakers

#ad
BOSS AUDIO KIT-10 #ad - 20 foot high performance RCA Interconnect, 6 Foot Split Loom Tubing. Ideal solutions for anyone looking to add bass to their vehicle. Frequency response: 10hz - 150Hz. Boss audio kit10 4 gauge amplifier installation wiring kit – power cable, split loon tubing, rubber grommets, ground cable, aGU Fuse, Fuse Holder, Gold-plated Ring Terminals, Wire Ties, Gold-plated Speaker Terminal 20 foot / 8 gauge red power Cable, Remote Turn-on Wire, Speaker Wire, RCA Interconnect, High Quality Competition Fuse Holder.

Aviation Grade Carpet. 3 foot - 8 gauge Black Ground Cable. 16 foot / 18 gauge blue remote turn-On Wire, 30 Foot 16 Gauge Speaker Wire. Music power nominal: 1, 200 w 400 w frequency response: 20 hz to 125 hz, sensitivity 1 w/1 m: 93 db, impedance: single 4Ω tight bass from a shallow compact design, Reinforced MICA injection-molded resin preloaded subwoofer cone.

BOSS Audio Systems KIT10 4 Gauge Amplifier Installation Wiring Kit - A Car Amplifier Wiring Kit Helps You Make Connections and Brings Power to Your Radio, Subwoofers and Speakers #ad - 4 gauge red cca copper clad aluminum power wire: 17 Feet / 4 Gauge Black CCA Copper Clad Aluminum Ground Wire: 3 Feet. 5/16" ring terminals, 1/4" Ring Terminals, 4 Speaker Terminals. 20 4" wire ties, 4 Rubber Grommets. Combines the sleek looks and power of a Terminator mono block amplifier with either a sealed enclosure.

20 foot / 4 gauge red power cable, High Quality Gold Plated Competition AGU Fuse. Black/white triple shielded Twisted Pair RCA Interconnect: 17 Feet.

More information about BOSS AUDIO KIT-10 #ad


Similar products



Bbox E12ST Single 12" Sealed Carpeted Truck Subwoofer Enclosure

#ad
ATREND E12ST #ad - Ft. Installation accessories/ Connectors / Terminals, Wire Ties and Wire Loom Included. 16 foot / 18 gauge blue remote turn-On Wire, 30 Foot 16 Gauge Speaker Wire. Net volume - 07". 20 4" wire ties, 3 Rubber Grommets. Frequency response: 10Hz - 150Hz. 17 foot high performance rcA Interconnect Cable, 6 Foot Split Loom Tubing.

Black/white triple shielded Twisted Pair RCA Interconnect: 17 Feet. 16 gauge brown/silver speaker wire: 17 Feet / 18 Gauge Blue Remote Wire: 18 Feet. 80 speaker hole cutout 11. 12" speaker face is. 75" body is 5/8" extra large terminals cups wire will be needed to run from the speaker to the terminal cup tabs IMPORTANT:Confirm the required speaker hole cutout is no more than 11.

Bbox E12ST Single 12" Sealed Carpeted Truck Subwoofer Enclosure #ad - 12". 5/16" ring terminals, 1/4" Ring Terminals, 4 Speaker Terminals. Max mounting Depth - 5. 25". Embroidered terminator Logo; Impedance: 2Ω. 5/8" mdf construction. Bbox 12-inch single-Sealed Truck Enclosure W 20

More information about ATREND E12ST #ad


Similar products



Kicker 10" 600 Watt 4 Ohm Vented Thin Profile Subwoofer Enclosure | 44TCWC104

#ad
KICKER 44TCWC104 #ad - 16 gauge brown/silver speaker wire: 17 Feet / 18 Gauge Blue Remote Wire: 18 Feet. Premium Charcoal Carpet. Frequency response: 10Hz - 150Hz. Max power: 600 watts. Combines the sleek looks and power of a Terminator mono block amplifier with either a sealed enclosure. Thin profile fits perfectly under or behind a seat.

Cutout diameter - 11. 125". Black/white triple shielded Twisted Pair RCA Interconnect: 17 Feet. Houses two 12-inch terminator subwoofers, TNP212D2, or a vented enclosure. 20 foot / 8 gauge red power Cable, High Quality Competition Fuse Holder. Embroidered terminator Logo; Impedance: 2Ω. This quality enclosure is built with heavy MDF construction and thick black carpet for durability.

Kicker 10" 600 Watt 4 Ohm Vented Thin Profile Subwoofer Enclosure | 44TCWC104 #ad - 20 4" wire ties, 3 Rubber Grommets. Max mounting Depth - 5. 25". Rms power: 300 watts. Impedance: 4 ohm. Frequency response: 10hz - 150Hz.

More information about KICKER 44TCWC104 #ad


Similar products



SCOSCHE LOC2SL Car Stereo 2-Channel Audio Adjustable Amplifier Add-On Adapter with Remote Control Knob in Black

#ad
SCOSCHE LOC2SL #ad - Rms power: 300 watts. Inline agu fuse holder w/ 80 amp AGU Fuse / Protective Black Wire Loom. Premium Charcoal Carpet. Frequency response: 10Hz - 150Hz. Ruggedly constructed using 5/8" MDF and aviation grade black carpet. Max power: 600 watts. Black/white triple shielded Twisted Pair RCA Interconnect: 17 Feet. 17 foot high performance rcA Interconnect Cable, 6 Foot Split Loom Tubing.

Height 15. 25" x width 19. 625" x depth 5" x 2nd Depth 8. 25". Houses two 12-inch terminator subwoofers, TNP212D2, or a vented enclosure. 20 foot high performance RCA Interconnect, 6 Foot Split Loom Tubing. Cutout diameter - 11. 125". 20 4" wire ties, 3 Rubber Grommets. Impedance: 4 ohm. Perfect for fast installation when adding a subwoofer to your factory car stereo system for a new sound experience.

SCOSCHE LOC2SL Car Stereo 2-Channel Audio Adjustable Amplifier Add-On Adapter with Remote Control Knob in Black #ad - Add subwoofers: works with high power car stereos up to 80 watts per channel to add subwoofer systems to any car stereo. Easy to install: Provides amplifier remote turn on output without removing car stereo.

More information about SCOSCHE LOC2SL #ad


Similar products



1000 Watts Maximum Power, 12 Inch , Single 4 Ohm Voice Coil, Sold Individually - BOSS Audio Systems CXX12 Car Subwoofer

#ad
Boss Audio Systems, Inc. CXX12 #ad - 20 4" wire ties, 4 Rubber Grommets. Ruggedly constructed using 5/8" MDF and aviation grade black carpet. Houses two 12-inch terminator subwoofers, TNP212D2, or a vented enclosure. Cutout diameter - 11. 125". Inline agu fuse holder w/ 80 amp AGU Fuse / Protective Black Wire Loom. 16 foot / 18 gauge blue turn-on wire, 30 Foot / 16 Gauge Speaker Wire.

Height 15. 25" x width 19. 625" x depth 5" x 2nd Depth 8. 25". Sealed enclosure internal volume: 1. 2 cubic feet, ported Enclosure Internal Volume: 1. 8 cubic Feet. Polypropylene cone, 2. 5 inch voice Coil, Rubber Surround. Music power nominal: 1, 200 w 400 w frequency response: 20 hz to 125 hz, sensitivity 1 w/1 m: 93 db, impedance: single 4Ω tight bass from a shallow compact design, Reinforced MICA injection-molded resin preloaded subwoofer cone.

1000 Watts Maximum Power, 12 Inch , Single 4 Ohm Voice Coil, Sold Individually - BOSS Audio Systems CXX12 Car Subwoofer #ad - 4 gauge red cca copper clad aluminum power wire: 17 Feet / 4 Gauge Black CCA Copper Clad Aluminum Ground Wire: 3 Feet. Thin profile fits perfectly under or behind a seat. Max power: 600 watts. Premium Charcoal Carpet.

More information about Boss Audio Systems, Inc. CXX12 #ad


Similar products



BOSS Audio Systems CXX8 Car Subwoofer - 600 Watts Maximum Power, 8 Inch, Single 4 Ohm Voice Coil, Easy Mounting - Sold Individually

#ad
Boss Audio Systems, Inc. PD12LED #ad - 3 foot - 8 gauge Black Ground Cable. Add subwoofers: works with high power car stereos up to 80 watts per channel to add subwoofer systems to any car stereo. Easy to install: Provides amplifier remote turn on output without removing car stereo. Output conversion: Converts car stereo speaker wire outputs to RCA Cable outputs.

Additional channel: Allows the addition of 2-channel or mono amplifiers to factory or aftermarket stereos. Controller: includes mountable remote control with knob for adjusting subwoofer bass audio level from the dash. Required for use: You must have an aftermarket amplifier in order to use this product. Buy with confidence: backed by Scosche's Lifetime Tech Support and Limited Lifetime Warranty.

BOSS Audio Systems CXX8 Car Subwoofer - 600 Watts Maximum Power, 8 Inch, Single 4 Ohm Voice Coil, Easy Mounting - Sold Individually #ad - Sensitivity spl 1w / 1m 85 dB, Resonant Frequency 32 Hz. Premium Charcoal Carpet. 20 4" wire ties, 3 Rubber Grommets. Frequency response: 10hz - 150Hz. It compliments the whole structure of the speaker By Allowing Constant Abuse Where It Is Most Needed, Without The Wear And Tear. 16 gauge brown/silver speaker wire: 17 Feet / 18 Gauge Blue Remote Wire: 18 Feet.

20 foot high performance RCA Interconnect, 6 Foot Split Loom Tubing. Gold plated agu in-line fuse holder, 3 Foot / 4 Gauge Black Ground Cable.

More information about Boss Audio Systems, Inc. PD12LED #ad


Similar products