40 Channel – NOAA Radio – Cobra C75WXST Handheld CB Radio – LCD Display

Cobra 75 WX ST - Noaa weather and emergency radio - Be prepared for storms and emergencies with built-in NOAA radio receiver. The complete radio fits in your hand design. Sound tracker system - Cuts noise up to 90 percent for clearer communication. Instant channel 9/19 - immediate access to emergency channel 9 or information channel 19.

Channel scan. 40 cb channels. Unified design; CB fits in your hand. Remote mount System - Allows convenient dashboard installation. Clearer transmissions and less-noisy reception. Plus instant access to channel 9 and 19, Dual -watch and all channel scan to monitor incoming signals, 4-channel programmable memory locations.

40 Channel - NOAA Radio - Cobra C75WXST Handheld CB Radio - LCD Display - Illuminated lcd display - For bright and clear visibility of display. The 75 wx st is a super compact hide-away Remote Mount design full featured CB radio with weather channels, ideal for vehicles where space is a premium. 10 noaa weather Channels.

More information about Cobra 75 WX ST

Firestik SS-3H Heavy Duty Stainless Steel Antenna Spring

Firestik Antenna SS-3H - 100% american made with 100% American materials. Firestik ss3h heavy duty stainless Steel Springs Made from long lasting, top grade electro-polished stainless steel. Standard 3/8" x 24 threads. Works with antennas up to 60" long.

More information about Firestik Antenna SS-3H


Similar products



18' RG-58A/U Coaxial Cable With Pl-259 Connectors

TruckSpec TS-18CC - Made from long lasting, top grade electro-polished stainless steel. Standard 3/8" x 24 threads. 100% american made with 100% American materials. Truckspec 18' antenna coax cable with PL-259 Connectors. Perfect for cb, amateur and Two-Way Radio Applications. High quality rg-58a/u coax with Molded PLK-259 Connectors Installed.

Works with antennas up to 60" long. 95 percent shielding coverage for protection of RF leaks and interference. For use with single CB antenna SO-239 stud mounts. Rg-58a/u coaxial cable with molded PL-259 connectors for moisture protection. Cb radio accessories. Antenna cables. Stranded center conductor for flexibility.

More information about TruckSpec TS-18CC


Similar products



FireStik K-1A Push-n-Twist quick disconnect

FireStik K-1A - 100% american made with 100% American materials. Works with antennas up to 60" long. K-1a push-n-twist quick disconnect Made from long lasting, top grade electro-polished stainless steel. Standard 3/8" x 24 threads. Truckspec 18' antenna coax cable with PL-259 Connectors. Perfect for cb, amateur and Two-Way Radio Applications.

High quality rg-58a/u coax with Molded PLK-259 Connectors Installed. Quickly remove your antenna without fumbling around for tools. Locking pin and the spring are made from stainless steel.

More information about FireStik K-1A


Similar products



FireStik FS-4BK 4 r Ii Fs Series Tunable Tip Cb Antenna - 900 Watts Black

Firestik FS4-B - Works with antennas up to 60" long. Requires Fine Tuning SWR. Locking pin and the spring are made from stainless steel. Hi-performance Loading Coil. 5/8 wave length design Rated @ 900 Watts. 100% american made with 100% American materials. Easy-tune bare-Hands Tunable Tip. Truckspec 18' antenna coax cable with PL-259 Connectors.

Perfect for cb, amateur and Two-Way Radio Applications. High quality rg-58a/u coax with Molded PLK-259 Connectors Installed. Quickly remove your antenna without fumbling around for tools. Can be used in Single or Dual Configurations. Firestik fs-4bk 4' firestikr ii fs series tunable tip cb Antenna - 900 Watts Black 1 Each Made from long lasting, top grade electro-polished stainless steel.

FireStik FS-4BK 4 r Ii Fs Series Tunable Tip Cb Antenna - 900 Watts Black - Standard 3/8" x 24 threads.

More information about Firestik FS4-B


Similar products



FireStik HEAVY DUTY SO-239 STUD MOUNT for CB RADIO ANTENNA BULK K-4A

Firestik 4332975828 - Easy-tune bare-Hands Tunable Tip. Fits all firestik antennas and mounts. 100% american made with 100% American materials. Works with antennas up to 60" long. Bulk item. Hi-performance Loading Coil. For any 1/2" hole. For any 1/2" hole fits all firestik antennas and mounts bulk item. Locking pin and the spring are made from stainless steel.

Requires Fine Tuning SWR. 5/8 wave length design Rated @ 900 Watts. Can be used in Single or Dual Configurations. No retail package. No retail package made from long lasting, top grade electro-polished stainless steel. Standard 3/8" x 24 threads. Truckspec 18' antenna coax cable with PL-259 Connectors. Perfect for cb, amateur and Two-Way Radio Applications.

FireStik HEAVY DUTY SO-239 STUD MOUNT for CB RADIO ANTENNA BULK K-4A - High quality rg-58a/u coax with Molded PLK-259 Connectors Installed. Quickly remove your antenna without fumbling around for tools.

More information about Firestik 4332975828


Similar products



Firestik FS-3BK Black 3' 650W Tunable Tip CB Antenna

Firestik FS-3BK - The tunable tip mechanism is made from rust-proof brass and has a rubber o-ring to hold the adjuster in place after tuning. Custom blended, glass fiber reinforced shaft, hi-performance loading coil. 100% american made with 100% American materials. Truckspec 18' antenna coax cable with PL-259 Connectors. Perfect for cb, amateur and Two-Way Radio Applications.

High quality rg-58a/u coax with Molded PLK-259 Connectors Installed. Quickly remove your antenna without fumbling around for tools. Easy-tune bare-Hands Tunable Tip. Fits all firestik antennas and mounts. To maintain a balance between flexibility and ruggedness, we use a custom blended, glass fiber reinforced shaft.

Firestik FS-3BK Black 3' 650W Tunable Tip CB Antenna - Each is wound with heavy insulated copper wire to prevent the oxidation and shorted windings often found on non-Firestik antennas. Bulk item. Locking pin and the spring are made from stainless steel. 5/8 wave length design, rated at 650 watts. Can be used in single or dual configurations. Each antenna is covered with a static reducing, water-tight sleeve containing UV and pigment stabilizers.

More information about Firestik FS-3BK


Similar products



YBERLIN CB Mic Holder Mount Hand Held Microphone Radio Mounting for Jeep Wrangler JK 2011-2018 Passenger Grab Bar

YBERLIN - Custom blended, glass fiber reinforced shaft, hi-performance loading coil. Why should you order this product? Nothing Worse Than A Wandering CB Mic. For any 1/2" hole. No retail package. Works with antennas up to 60" long. Can be used in single or dual configurations. Locking pin and the spring are made from stainless steel.

Hi-performance Loading Coil. Package & warranty:1 cb radio mic mount, 1 side spacer. Please contact Our Support Team At Any Time. Easy-tune bare-Hands Tunable Tip. Can be used in Single or Dual Configurations. Truckspec 18' antenna coax cable with PL-259 Connectors. Perfect for cb, amateur and Two-Way Radio Applications.

YBERLIN CB Mic Holder Mount Hand Held Microphone Radio Mounting for Jeep Wrangler JK 2011-2018 Passenger Grab Bar - High quality rg-58a/u coax with Molded PLK-259 Connectors Installed. Quickly remove your antenna without fumbling around for tools. 5/8 wave length design Rated @ 900 Watts. 100% american made with 100% American materials. Retain the value of your vehicle. Requires Fine Tuning SWR.

More information about YBERLIN


Similar products



FIRESTIK K-4A CB RADIO ANTENNA HEAVY DUTY SO-239 STUD MOUNT BULK

Firestik - Stable metal mic bracket: keeps cb microphone in the perfect position in Reach and Visible To The Driver While No Worries, As They Will Always Be At Hand's Reach and Safely Stored Inside This Bracket. 100% american made with 100% American materials. Package & warranty:1 cb radio mic mount, 1 side spacer. Works with antennas up to 60" long.

No retail package. Truckspec 18' antenna coax cable with PL-259 Connectors. Perfect for cb, amateur and Two-Way Radio Applications. High quality rg-58a/u coax with Molded PLK-259 Connectors Installed. Quickly remove your antenna without fumbling around for tools. Custom blended, glass fiber reinforced shaft, hi-performance loading coil.

FIRESTIK K-4A CB RADIO ANTENNA HEAVY DUTY SO-239 STUD MOUNT BULK - Can be used in single or dual configurations. Not take up the limited room in the jeep cab dashboard and Console Moreover Out of The Way That Will Not Interferes with Passenger Comfort. Easy install: standard dimensions are specially designed for passenger grab bar insertion fits Jeep Wrangler JK Models 2011-2018 NOT for 2007-2010 Models and Mic Holder with Round Button Type Clips Clamp like Cobra 75WXST CB Radios.

Please contact Our Support Team At Any Time. For any 1/2" hole. 5/8 wave length design Rated @ 900 Watts.

More information about Firestik


Similar products



Rugged Ridge 11503.89 CB Antenna Mount

Rugged Ridge 11503.89 - No retail package. Easy-tune bare-Hands Tunable Tip. Please contact Our Support Team At Any Time. For any 1/2" hole. Hidden mounting point. Easily and quickly install your CB antenna to your Jeep with the new Rugged Ridge spare tire carrier mount antenna mount. Bulk item. Easy-tune bare-hands tunable tip, 3/8 inch x 24 threaded base with tapered contact end.

Truckspec 18' antenna coax cable with PL-259 Connectors. Perfect for cb, amateur and Two-Way Radio Applications. High quality rg-58a/u coax with Molded PLK-259 Connectors Installed. Quickly remove your antenna without fumbling around for tools. Simple neat: no cutting, drilling, sticking. 100% american made with 100% American materials.

Rugged Ridge 11503.89 CB Antenna Mount - No retail package. Requires fine tuning SWR. For any 1/2" hole. Bulk item. 5/8 wave length design Rated @ 900 Watts. Custom blended, glass fiber reinforced shaft, hi-performance loading coil. Retain the value of your vehicle.

More information about Rugged Ridge 11503.89


Similar products