AOSHIKE TPA3116 DC 12-24v 100W Subwoofer Amplifier Board Support Bass Output Digital Small Power Amplifier Board Video Audio Accessories

AOSHIKE 7545916824 - You can use a good switching power supply adapter, or rectified filter transformer power supply, you can also use rechargeable batteries, laptop switching power supply, or vehicle power supply and so on. Operating voltage range: dc 12-24vmaximum voltage is no more than 24V; built-in TPA3116 amplifier chip;This is a pre-amplifier, bass frequency processing, with bass volume potentiometer control of the bass amplifier board.

Dc 12-24v power supply, wide operating voltage, power-saving design, more than 90% power efficiency. Frequency response range: input: 20 hz - 20 KHZ, output: 20 hz - 180 hz Audio input sensitivity: 500 mv. Maximum support 100W Bass bass channel output. Audio input sensitivity: 500 mv;Speaker impedance: bass speaker impedance: 2-8 ohm.

AOSHIKE TPA3116 DC 12-24v 100W Subwoofer Amplifier Board Support Bass Output Digital Small Power Amplifier Board Video Audio Accessories - Speaker impedance: bass speaker impedance: 2-8 ohm bass output power: 12v/10w8ohm/ >19w4ohm/>22 w 3ohm m />30w2ohm 15v/>15w8ohm/>29w4ohm/>39w3ohm/>50w2ohm 19v/>24w8ohm/>48w4ohm/>60w3ohm/>75w2ohm 24V/>38w8ohm/>75w4ohm/>95w2-3ohm Packaging included 1pcs* Subwoofer Amplifier Board 100w subwoofer amplifier board;frequency response range: input: 20 hz - 20 KHZ, output: 20 hz - 180 hz.

Tpa3116 dc 12-24v 100w subwoofer amplifier board support bass output, dc power supply wide working voltage, power saving type design, Video Audio Accessories Power supply: DC 12-24V Output power: 100W Use 12 to 24 v power supply, efficiency is as high as above 90 percent. The biggest can support 100 w bass sound channel output Working voltage range: Dc 9 to 25 v current 2 -3A above, if you want to power Big, advice 19-24v 4A above.

More information about AOSHIKE 7545916824

AOSHIKE 8-25V 100W TPA3116 Subwoofer Digital Power Amplifier Board TPA3116D2 Amplifiers NE5532 subwoofer Plate Amplifier

AOSHIKE 7545916825 - You can use switching power supply, laptop power supply, battery or vehicle power supply and so on. Packaging included: 1pcs*tpa3116d2 100w subwoofer digital power amplifier Board NE5532 OPAMP 8-25V Power range: 8-25v;power connector is a standard 5. 5mm power jack, you can use your laptop power, Other input is Aux input, it is 3.

5mm port. Maximum output power: 50w left channel + 50W Right channel, dual- channel output, efficiency up to 90 percent. Adopt tpa3116 high-performance amplifier chip as the core, DC single power supply, wide operating Voltage range 8-25V. Can use the switching power supply, battery and vehicle power supplymake sure the power supply is adequate, laptop switching power supply, About 3A.

AOSHIKE 8-25V 100W TPA3116 Subwoofer Digital Power Amplifier Board TPA3116D2 Amplifiers NE5532 subwoofer Plate Amplifier - The audio input is sufficient, and the Power voltage/current is sufficient, and 12-24V, in this case, there will be enough output power. Here is the 19V power link:https://www. Amazon. Com/gp/product/b07QBMVLTF?th=1. Pcb size: 75x60mm any problem with it, pls contact us:https://www. Amazon. Com/sp?seller=a3bg62S1F23IH5.

More information about AOSHIKE 7545916825


Similar products



AOSHIKE DC12V-24V 2.1 Channel TPA3116 Subwoofer Amplifier Board High Power Bluetooth Audio Amplifier Board Bluetooth Amp

AOSHIKE 7545884784 - You can use a good switching power supply adapter, or rectified filter transformer power supply, laptop switching power supply, you can also use rechargeable batteries, or vehicle power supply and so on. Maximum support 100W Bass bass channel output. Audio input sensitivity: 500 mv;Speaker impedance: bass speaker impedance: 2-8 ohm.

Speaker impedance: bass speaker impedance: 2-8 ohm bass output power: 12v/10w8ohm/ >19w4ohm/>22 w 3ohm m />30w2ohm 15v/>15w8ohm/>29w4ohm/>39w3ohm/>50w2ohm 19V/>24w8ohm/>48w4ohm/>60w3ohm/>75w2ohm 24V/>38w8ohm/>75w4ohm/>95w2-3ohm Packaging included 1pcs* Subwoofer Amplifier Board Power range: 8-25v;power connector is a standard 5.

5mm power jack, other input is Aux input, you can use your laptop power, it is 3.5mm port. Maximum output power: 50w left channel + 50W Right channel, dual- channel output, efficiency up to 90 percent. Adopt tpa3116 high-performance amplifier chip as the core, DC single power supply, wide operating Voltage range 8-25V.

AOSHIKE DC12V-24V 2.1 Channel TPA3116 Subwoofer Amplifier Board High Power Bluetooth Audio Amplifier Board Bluetooth Amp - Can use the switching power supply, battery and vehicle power supplymake sure the power supply is adequate, laptop switching power supply, About 3A. The audio input is sufficient, and 12-24V, And the Power voltage/current is sufficient, in this case, there will be enough output power. Operating voltage range: dc 12-24vmaximum voltage is no more than 24V; built-in TPA3116 amplifier chip;This is a pre-amplifier, bass frequency processing, with bass volume potentiometer control of the bass amplifier board.

Dc 12-24v power supply, wide operating voltage, power-saving design, more than 90% power efficiency.

More information about AOSHIKE 7545884784


Similar products



Car Vehicle Subwoofer Audio Speaker - Pyle PLPW6D - 6 Inch Non-Pressed Paper Cone, Black Steel Basket, Dual Voice Coil 4 Ohm Impedance, 600 Watt Power, Foam Surround for Vehicle Stereo Sound System

Sound Around PLPW6D - 100w subwoofer amplifier board;frequency response range: input: 20 hz - 20 KHZ, output: 20 hz - 180 hz. You can use a good switching power supply adapter, you can also use rechargeable batteries, laptop switching power supply, or rectified filter transformer power supply, or vehicle power supply and so on.

600 watt power: this 6. 5in car subwoofer has a power of 300 Watt RMS to 600 Watt peak that will produce high sound resonance. Pyle power speakers pack a huge punch! The PLPW6D is a 6-Inch booming 600 watt subwoofer designed with the bass lover in mind. It also has a spring loaded push down speaker terminals that will maximize sound quality.

Car Vehicle Subwoofer Audio Speaker - Pyle PLPW6D - 6 Inch Non-Pressed Paper Cone, Black Steel Basket, Dual Voice Coil 4 Ohm Impedance, 600 Watt Power, Foam Surround for Vehicle Stereo Sound System - Power range: 8-25v;power connector is a standard 5. 5mm power jack, other input is Aux input, you can use your laptop power, it is 3.5mm port. Maximum output power: 50w left channel + 50W Right channel, dual- channel output, efficiency up to 90 percent. 2. 9" mounting depth: easy to install with its 2. 9" mounting depth and fits most audio system for cars, boats or RVs.

. Magnet that will enhance car stereo or radio by producing a powerful audio and unmatched performance.

More information about Sound Around PLPW6D


Similar products



Aiyima 1pcs DC 9-32V Low Pass Filter Bass Subwoofer Pre-AMP Amplifier Board Single Power

Aiyima 7545916821 - This board is a preamp board, and is not designed to be directly connected to the speaker. It comes with a sensitivity or SPL of 89dB to resonate perfect clarity. Treated foam surround: made entirely of specially treated foam surround for durability. You can use a good switching power supply adapter, you can also use rechargeable batteries, or rectified filter transformer power supply, laptop switching power supply, or vehicle power supply and so on.

600 watt power: this 6. 5in car subwoofer has a power of 300 Watt RMS to 600 Watt peak that will produce high sound resonance. Adopt tpa3116 high-performance amplifier chip as the core, DC single power supply, wide operating Voltage range 8-25V. Can use the switching power supply, laptop switching power supply, battery and vehicle power supplymake sure the power supply is adequate, About 3A.

Aiyima 1pcs DC 9-32V Low Pass Filter Bass Subwoofer Pre-AMP Amplifier Board Single Power - The audio input is sufficient, in this case, And the Power voltage/current is sufficient, and 12-24V, there will be enough output power. Dual voice coil: the speaker subwoofer comes with a dual 4 Ohm impedance that can be wired as 4 or 8 Ohm. The buyer must understand knowledge of this area. Maximum support 100W Bass bass channel output.

Audio input sensitivity: 500 mv;Speaker impedance: bass speaker impedance: 2-8 ohm. It must be connected to the subsequent stage of an amplifier board for this pre-amp to work.

More information about Aiyima 7545916821


Similar products



Yeworth 3.5mm 1/8 inch Mono Male Plug to RCA Male Jack Audio Cable Cord Gold Plated 1.8m 6Ft

DM LYSB01CAH151I-ELECTRNCS - Long lasting Molded Plug with Strain Relief. Unmatched performance: built with 30 oz. Magnet that will enhance car stereo or radio by producing a powerful audio and unmatched performance. Dual channel input, subwoofer output, then the output amp|ifier, can not directly connected to the speaker. The multi-stage filter, better bass effect, The phase adjustable.

Included are the necessary cables, installation template and manual. Package include: 1 x Yeworth 3. 5mm mono male to rca male cable Power range: 8-25v;power connector is a standard 5. 5mm power jack, you can use your laptop power, Other input is Aux input, it is 3.5mm port. Maximum output power: 50w left channel + 50W Right channel, dual- channel output, efficiency up to 90 percent.

Yeworth 3.5mm 1/8 inch Mono Male Plug to RCA Male Jack Audio Cable Cord Gold Plated 1.8m 6Ft - Connectors: rca plug to 3. 5 mm mono plug. Adopt tpa3116 high-performance amplifier chip as the core, DC single power supply, wide operating Voltage range 8-25V. Can use the switching power supply, battery and vehicle power supplymake sure the power supply is adequate, laptop switching power supply, About 3A.

The audio input is sufficient, and 12-24V, in this case, And the Power voltage/current is sufficient, there will be enough output power.100w subwoofer amplifier board;frequency response range: input: 20 hz - 20 KHZ, output: 20 hz - 180 hz.

More information about DM LYSB01CAH151I-ELECTRNCS


Similar products



Dayton Audio TT25-8 Puck Tactile Transducer Mini Bass Shaker 8 Ohm Black

Dayton Audio TT25-8 - Connectors: rca plug to 3. 5 mm mono plug. It must be connected to the subsequent stage of an amplifier board for this pre-amp to work. The so-called low-pass filter to filter out the human voice board is more than treble part, retain the low frequency part is amplified to improve the bass reproduction efforts, people will not hear the sound of musical instruments and high-frequency sound during playback.

100w subwoofer amplifier board;frequency response range: input: 20 hz - 20 KHZ, output: 20 hz - 180 hz. Add tactile feedback to chairs and couches for the ultimate gaming and movie experience. Treated foam surround: made entirely of specially treated foam surround for durability. Feel the bass! Adopt tpa3116 high-performance amplifier chip as the core, DC single power supply, wide operating Voltage range 8-25V.

Dayton Audio TT25-8 Puck Tactile Transducer Mini Bass Shaker 8 Ohm Black - Can use the switching power supply, battery and vehicle power supplymake sure the power supply is adequate, laptop switching power supply, About 3A. The audio input is sufficient, and 12-24V, And the Power voltage/current is sufficient, in this case, there will be enough output power. The 1. 5" 4-layer dual voice coil can resist corrosion and ensure a longer life span.

Operating voltage range: dc 12-24vmaximum voltage is no more than 24V; built-in TPA3116 amplifier chip;This is a pre-amplifier, bass frequency processing, with bass volume potentiometer control of the bass amplifier board.

More information about Dayton Audio TT25-8


Similar products



AuraSound AST-2B-4 Pro Bass Shaker Tactile Transducer

AuraSound AST-2B-4 - It must be connected to the subsequent stage of an amplifier board for this pre-amp to work. The so-called low-pass filter to filter out the human voice board is more than treble part, retain the low frequency part is amplified to improve the bass reproduction efforts, people will not hear the sound of musical instruments and high-frequency sound during playback.

Here is the 19V power link:https://www. Amazon. Com/gp/product/b07QBMVLTF?th=1. Pcb size: 75x60mm any problem with it, pls contact us:https://www. Amazon. Com/sp?seller=a3bg62S1F23IH5. Adopt tpa3116 high-performance amplifier chip as the core, DC single power supply, wide operating Voltage range 8-25V. Can use the switching power supply, battery and vehicle power supplymake sure the power supply is adequate, laptop switching power supply, About 3A.

AuraSound AST-2B-4 Pro Bass Shaker Tactile Transducer - The audio input is sufficient, and the Power voltage/current is sufficient, and 12-24V, in this case, there will be enough output power. You can use a good switching power supply adapter, or rectified filter transformer power supply, laptop switching power supply, you can also use rechargeable batteries, or vehicle power supply and so on.

600 watt power: this 6. 5in car subwoofer has a power of 300 Watt RMS to 600 Watt peak that will produce high sound resonance. Operating voltage range: dc 12-24vmaximum voltage is no more than 24V; built-in TPA3116 amplifier chip;This is a pre-amplifier, bass frequency processing, with bass volume potentiometer control of the bass amplifier board.

More information about AuraSound AST-2B-4


Similar products



AVAWO DC 24V15A 360W Switching Power Supply Transformer Regulated for LED Strip light, CCTV, Radio, Computer Project etc.

AVAWO AW1434 - Mini Bass Shaker. 100w subwoofer amplifier board;frequency response range: input: 20 hz - 20 KHZ, output: 20 hz - 180 hz. Safety compliance: ccc/ fcc / ce -working temperature: 0~40℃ -storage temperature: -20~60℃ -ambient humidity: 0~95% non-condensation -Only Supply ONE LED Strip -IN-DOOR USE ONLY! -This Power Supply Unit "DOES NOT" come with installation instruction, on/off switch, wiring cable, or screws.

Magnet that will enhance car stereo or radio by producing a powerful audio and unmatched performance. Professional installation of qualified electrician is highly recommended. The 1. 5" 4-layer dual voice coil can resist corrosion and ensure a longer life span. Features: -100% brand new -weight:773g -Product Size: 21.

AVAWO DC 24V15A 360W Switching Power Supply Transformer Regulated for LED Strip light, CCTV, Radio, Computer Project etc. - 5 x 11. 5 x 5. 0 cm -input voltage: 200v~240v/100v~120v ±20% -output voltage: 24V DC -Output Current: 0~15. 0a -shell material: metal case / aluminum base -protection: Shortage Protection, LED display, communications, Over Voltage Protection -Widely used in Industrial automation, Overload Protection, etc.

5. 4 x 2. 2" frame.

More information about AVAWO AW1434


Similar products



PIXNOR 5pcs DIY Home Car Stereo 2-Way Speaker Box Terminal Binding Post Round Spring Cup Connectors Subwoofer Plugs Black

PIXNOR 14756495014-1 - Easy installation with screws locking and easy to use. Small and easy to install. For led strip light Display 200V~240V. Dual voice coil: the speaker subwoofer comes with a dual 4 Ohm impedance that can be wired as 4 or 8 Ohm. Protection: shortage Protection, Overload Protection, Over Voltage Protection. Power : 360w;body size : 21.

5 x 11. 5 x 5cm/ 8. 5" x 4. 5"l*w*h. This board is a preamp board, and is not designed to be directly connected to the speaker. The buyer must understand knowledge of this area. Power supply voltage: DC 9V-32V DC single power supply. Description the item is a set of 5pcs professional and practical 2-way speaker terminal round spring cup connectors, which is mainly made of durable plastic and gold-plated metal, and designed for DIY speaker and subwoofer boxes.

PIXNOR 5pcs DIY Home Car Stereo 2-Way Speaker Box Terminal Binding Post Round Spring Cup Connectors Subwoofer Plugs Black - Cutout diameter: about 45mm 1 7/8 "; overall diameter: about 75mm 3"; Top-mount depth: 20mm 7/8". Dc 24v 15a 360w switch Power Supply Driver. Positive red and negative Black indicators to ensure proper wiring. 2. 9" mounting depth: easy to install with its 2.

More information about PIXNOR 14756495014-1


Similar products



High Speed SBC with Peripheral ICs - Atomic Pi

Digital Loggers Inc - Optional breakout shield with screw terminals for easy wiring and USB debug port. It also has a spring loaded push down speaker terminals that will maximize sound quality. You can use a good switching power supply adapter, laptop switching power supply, you can also use rechargeable batteries, or rectified filter transformer power supply, or vehicle power supply and so on.

600 watt power: this 6. 5in car subwoofer has a power of 300 Watt RMS to 600 Watt peak that will produce high sound resonance. Adopt tpa3116 high-performance amplifier chip as the core, DC single power supply, wide operating Voltage range 8-25V. Can use the switching power supply, battery and vehicle power supplymake sure the power supply is adequate, laptop switching power supply, About 3A.

High Speed SBC with Peripheral ICs - Atomic Pi - The audio input is sufficient, and the Power voltage/current is sufficient, and 12-24V, in this case, there will be enough output power. Power supply and wiring sold separately. Eats rPi for dessert. Add tactile feedback to chairs and couches for the ultimate gaming and movie experience. Dc 24v 15a 360w switch Power Supply Driver.

What will you make with it? Positive red and negative Black indicators to ensure proper wiring.

More information about Digital Loggers Inc


Similar products