HiLetgo 3pcs ADS1115 16 Bit 16 Byte 4 Channel I2C IIC Analog-to-Digital ADC PGA Converter with Programmable Gain Amplifier High Precision ADC Converter Development Board for Arduino Raspberry Pi

#ad
HiLetgo #ad - The chip's fairly small so it comes on a breakout board with ferrites to keep the AVDD and AGND quiet. Single-shot mode: auto shut Down; Programmable data rate: 8sps-860sps. The chip can be configured as 4 single-ended input channels, or two differential channels. Parameters: adc bit rate: 16 bit interface type: i2c Channels: 4 Channel AN0 AN1 AN2 AN3 Input voltage: 2.

0v-5. 5v channel input voltage : 0-vdd continuous mode: only 150μa single-Shot Mode: Auto Shut Down Programmable data rate: 8sps-860sps Input range programmed control, 7 types input ranges: -0256v ~ + 0256v, -0512v ~ + 0512v, -1. 024v ~ + 1. 024v, -2. 048v ~ + 2. 048v, -4. 096v ~ + 4. 096 v, -6. 144v ~ + 6. 144v i2c 7-bit addresses between 0x48-0x4b package included: 3 * ads1115 16 bit 4 channel analog-to-Digital ADC Converter 3 * Pin Header High precision ads1115 16 bit 4 Channel Analog-to-Digital ADC Converter.

HiLetgo 3pcs ADS1115 16 Bit 16 Byte 4 Channel I2C IIC Analog-to-Digital ADC PGA Converter with Programmable Gain Amplifier High Precision ADC Converter Development Board for Arduino Raspberry Pi #ad - As a nice bonus, up to x16, it even includes a programmable gain amplifier, to help boost up smaller single/differential signals to the full range.

More information about HiLetgo #ad

HiLetgo 3pcs ESP8266 NodeMCU CP2102 ESP-12E Internet WiFi Development Board Open Source Serial Wireless Module Works Great with Arduino IDE/Micropython Pack of 3PCS

#ad
HiLetgo #ad - Set up your arduino ide as: go to file->preferences and copy the URL below to get the ESP board manager extensions: http://arduino. Esp8266. Com/stable/package_esp8266com_index. Json placing the http:// before the URL lets the Arduino IDE use it. Otherwise it gives you a protocol error. Download the Arduino IDE, the latest version.

Package included: 3* esp8266 nodemcu lua cp2102 wifi wireless Development Board Esp8266 cp2102 nodemcu lua esp-12e wifi serial Wireless Module. 5. We provide 100% satisfication service for customers. Install the IDE 3. Instruction & Steps of How to use: 1. Download and run the 32 bit flasher exe at GithubSearch for nodemcu/nodemcu-flasher/tree/master/ at Github github.

HiLetgo 3pcs ESP8266 NodeMCU CP2102 ESP-12E Internet WiFi Development Board Open Source Serial Wireless Module Works Great with Arduino IDE/Micropython Pack of 3PCS #ad - Com/nodemcu/nodemcu-flasher/tree/master/Win32/Release Or download and run the 64 bit flasher exe at: github. Com/nodemcu/nodemcu-flasher/tree/master/Win64/Release 7. Arduino compatible, works great with the latest Arduino IDE/Mongoose IoT/Micropython. Esp8266 is a highly integrated chip designed for the needs of a new connected world.

Go to file> examples> esp8266> blink, it will start blinking.

More information about HiLetgo #ad


Similar products



KeeYees 60pcs 5mm Pitch 2 Pin & 3 Pin PCB Mount Screw Terminal Block Connector for Arduino 50 x 2 Pin, 10 x 3 Pin

#ad
KeeYees #ad - Package include: 50pcs 2 pin screw Terminal Block Connector ; 10pcs 3 Pin Screw Terminal Block Connector. Arduino compatible, works great with the latest Arduino IDE/Mongoose IoT/Micropython. Keeyees: best choice in various electronic modules & components, diy parts and tools to support your work and design challenges from Home, School to Industrial applications! Parameter: Pin number: 2 Pin and 3 Pin Pitch: 5mm Rated voltage: 300V Rated current: 10A.

For wire size: 14-22awg material : abs plastic, electric parts colour: blue package include: 50 x 2 Pin Screw Terminal Block 10 x 3 Pin Screw Terminal Block Esp8266 cp2102 nodemcu lua esp-12e wifi serial Wireless Module. For wire size: 14-22AWG. Rated value: ac 300V, 10A. 2 pin & 3 pin. Pitch: 5mm. Built-in micro-usb, with flash and reset switches, easy to program.

KeeYees 60pcs 5mm Pitch 2 Pin & 3 Pin PCB Mount Screw Terminal Block Connector for Arduino 50 x 2 Pin, 10 x 3 Pin #ad - Data download access to the website: http://www. Nodemcu. Com. Full i/o port and wireless 802. 11 supported, direct download no need to reset.

More information about KeeYees #ad


Similar products



HiLetgo ADS1115 16 Bit 16 Byte 4 Channel I2C IIC Analog-to-Digital ADC PGA Converter with Programmable Gain Amplifier High Precision ADC Converter Development Board for Arduino Raspberry Pi

#ad
HiLetgo #ad - Arduino compatible, works great with the latest Arduino IDE/Mongoose IoT/Micropython. Wide voltage supply range: 2. 0v to 5. 5v, operate in a comparator mode which is helpful for maintaining accuracy. Interfacing is done via I2C. High precision ads1115 16 bit 4 Channel Analog-to-Digital ADC Converter. Rated value: ac 300V, 10A.

. Pitch: 5mm. The chip's fairly small so it comes on a breakout board with ferrites to keep the AVDD and AGND quiet. Package include: 50pcs 2 pin screw Terminal Block Connector ; 10pcs 3 Pin Screw Terminal Block Connector. As a nice bonus, it even includes a programmable gain amplifier, up to x16, to help boost up smaller single/differential signals to the full range.

HiLetgo ADS1115 16 Bit 16 Byte 4 Channel I2C IIC Analog-to-Digital ADC PGA Converter with Programmable Gain Amplifier High Precision ADC Converter Development Board for Arduino Raspberry Pi #ad - 2 pin & 3 pin. Especially a good tool for Raspberry Pi that doesn't come with analog GPIO pins. Data download access to the website: http://www. Nodemcu. Com. An easy to use i2c adc Converter, with Programmable Gain Amplifier. Simply connect gnd to ground, vdd to your logic power supply, and SCL/SDA to your microcontroller's I2C port and run the example code to start reading data.

More information about HiLetgo #ad


Similar products



MELIFE 2 Pack ESP32 ESP-32S Development Board 2.4GHz Dual-Mode WiFi + Bluetooth Dual Cores Microcontroller Processor Integrated with ESP32s Antenna RF AMP Filter AP STA for Arduino IDE

#ad
MELIFE #ad - Pitch: 5mm. Especially a good tool for Raspberry Pi that doesn't come with analog GPIO pins. Esp32 is already integrated antenna and RF balun, filters, low-noise amplifiers, power amplifier, and power management module. The entire solution takes up the least amount of printed circuit board area. This board is used with 2.

4 ghz dual-mode wi-fi and bluetooth chips by tsmc 40nm low power technology, which is safe, reliable, power and RF properties best, and scalable to a variety of applications. Features: high performance-price ratiosmall volume, sta, freertossupporting three modes: AP, and AP+STASupporting Lua program, easily embeded to other productsStrong function with support LWIP protocol, easily to developDevelopment Board: https://github.

MELIFE 2 Pack ESP32 ESP-32S Development Board 2.4GHz Dual-Mode WiFi + Bluetooth Dual Cores Microcontroller Processor Integrated with ESP32s Antenna RF AMP Filter AP STA for Arduino IDE #ad - Com/espressif/arduino-esp32https://github. Com/nodemcu/nodemcu-firmware/tree/dev-esp32https://github. Com/nicholas3388/luanodeif it cann't get bluetooth working?Using Node32s as the Board selection. Supportthree modes: ap, STA, and AP+STA. Rated value: ac 300V, 10A. Esp32 is a safe, reliable, and scalable to a variety of applications.

Ultra-low power consumption, works perfectly with the Arduino IDE. High precision ads1115 16 bit 4 Channel Analog-to-Digital ADC Converter.

More information about MELIFE #ad


Similar products



IZOKEE D1 Mini NodeMcu Lua 4M Bytes WLAN WiFi Internet Development Board Base on ESP8266 ESP-12F for Arduino, 100% Compatible with WeMos D1 Mini Pack of 5

#ad
IZOKEE IZKE29-5 #ad - 5v 1a switching power supply onboard. 11 digital input/output pins, all pins have interrupt/pwm/I2C/one-wire and a micro-USB connection. Python on windows you need install Python 2. 7. 102 pack 2. 4ghz dual mode wifi + Bluetooth Development Board. Especially a good tool for Raspberry Pi that doesn't come with analog GPIO pins.

How to get it started in arduino: - Setup driver Before you use mini D1 boards, you need set up CH340g driver. We recommend using GIT, you can always get the latest version. Package includes: 5 x d1 mini nodemcu lua wlan wifi internet Development Board Esp8266 cp2102 nodemcu lua esp-12e wifi serial Wireless Module.

IZOKEE D1 Mini NodeMcu Lua 4M Bytes WLAN WiFi Internet Development Board Base on ESP8266 ESP-12F for Arduino, 100% Compatible with WeMos D1 Mini Pack of 5 #ad - Supported except D0 For wire size: 14-22AWG. Support OTA on line. Arduino compatible, works great with the latest Arduino IDE/Mongoose IoT/Micropython. Pitch: 5mm. Esp32 is a safe, reliable, and scalable to a variety of applications. On linux & mac osx, you don't need install it, comes preinstalled with OS. Data download access to the website: http://www.

More information about IZOKEE IZKE29-5 #ad


Similar products



SCT-013-000 Non-invasive AC Current Sensor Split Core Transformer 100A

#ad
CTYRZCH #ad - For wire size: 14-22AWG. Single-shot mode: auto shut Down; Programmable data rate: 8sps-860sps. Full i/o port and wireless 802. 11 supported, direct download no need to reset. Wide voltage supply range: 2. 0v to 5. 5v, operate in a comparator mode which is helpful for maintaining accuracy. Fits for ac motors, air compressors and other current measurements, lighting equipment, monitoring and protection.

Data download access to the website: http://www. Nodemcu. Com. This d1 mini module is a mini WIFI board based on ESP-8266EX. This wlan board contains 11 digital input / output pins, all pins have interrupt / I2C / pwm / 1-wire and a micro-USB connection. Our d1 mini development board is 100% compatible with Arduino WeMos and can be programmed in the Arduino IDE.

SCT-013-000 Non-invasive AC Current Sensor Split Core Transformer 100A #ad - Operating temperature: -25 C ~ +70 C. Esp8266 cp2102 nodemcu lua esp-12e wifi serial Wireless Module. An easy to use i2c adc Converter, with Programmable Gain Amplifier. High precision ads1115 16 bit 4 Channel Analog-to-Digital ADC Converter. Opening size: 13mm * 13mm, non-linearity 3%10%-120% rated input current.

2 pin & 3 pin.

More information about CTYRZCH #ad


Similar products



3.5mm Stereo Female terminal block panel mount connector 2 pack

#ad
KINGDEE INC 8541740711 #ad - Single-shot mode: auto shut Down; Programmable data rate: 8sps-860sps. 3. 5mm stereo female terminal block with a  nut for convenient panel mounting. Package include: 50pcs 2 pin screw Terminal Block Connector ; 10pcs 3 Pin Screw Terminal Block Connector. Supportthree modes: ap, STA, and AP+STA. For wire size: 14-22AWG.

Clearly marked terminal block provides fast and easy termination. 3. 5mm stereo female terminal block are good solution for field wiring tasks. Opening size: 13mm * 13mm, non-linearity 3%10%-120% rated input current. Fits for ac motors, lighting equipment, air compressors and other current measurements, monitoring and protection.

3.5mm Stereo Female terminal block panel mount connector 2 pack #ad - Used to add a 3. 5mm port where field termination is required. 2 pack 2. 4ghz dual mode wifi + Bluetooth Development Board. This d1 mini module is a mini WIFI board based on ESP-8266EX. This wlan board contains 11 digital input / pwm / output pins, all pins have interrupt / I2C / 1-wire and a micro-USB connection.

Our d1 mini development board is 100% compatible with Arduino WeMos and can be programmed in the Arduino IDE. Operating temperature: -25 C ~ +70 C.

More information about KINGDEE INC 8541740711 #ad


Similar products



Raspberry SC15184 Pi 4 Model B 2019 Quad Core 64 Bit WiFi Bluetooth 2GB

#ad
Raspberry Pi SC15184 #ad - 0, ble true gigabit ethernet 2 × USB 3. Especially a good tool for Raspberry Pi that doesn't come with analog GPIO pins. Fits for ac motors, air compressors and other current measurements, lighting equipment, monitoring and protection. Used to add a 3. 5mm port where field termination is required. 1. 5m leading wire, Φ3.

5 3 core plug standard output. Micro sd card slot for loading operating system and data storage. Full i/o port and wireless 802. 11 supported, direct download no need to reset. 4 ghz and 5. Tuv certificated 3. 81mm pitch terminal blocks provide reliable connections with cables. Rated value: ac 300V, 10A. For wire size: 14-22AWG.

Raspberry SC15184 Pi 4 Model B 2019 Quad Core 64 Bit WiFi Bluetooth 2GB #ad - 2 × micro hdmi ports supproting up to 4Kp60 video resolution. 4/5. 0 ghz wireless LAN, Bluetooth 5. 4m memory, support LWIP protocol, Freertos. 4 ghz and 5.

More information about Raspberry Pi SC15184 #ad


Similar products



UCTRONICS 0.96 Inch OLED Module 12864 128x64 Yellow Blue SSD1306 Driver I2C Serial Self-Luminous Display Board for Arduino Raspberry PI

#ad
UCTRONICS U602602 #ad - 0 ghz ieee 802. 2 × micro hdmi ports supproting up to 4Kp60 video resolution. 0 ports, 2 x usb 2. There is also a simple switch-cap charge pump that turns 5v into a low voltage drive for the OLEDs, making this module the easiest ways to get an OLED into your project. That is, except the vcc and gnd, 2 wires would be needed when using 4-wires I2C mode.

Communication: i2c/iic Interface, only need two I / O ports. Clearly marked terminal block provides fast and easy termination. Fits for ac motors, lighting equipment, air compressors and other current measurements, monitoring and protection. Used to add a 3. 5mm port where field termination is required. Uctronics 0

UCTRONICS 0.96 Inch OLED Module 12864 128x64 Yellow Blue SSD1306 Driver I2C Serial Self-Luminous Display Board for Arduino Raspberry PI #ad - 96 inch oled module for showing graphical & textual information directly on your micro-controller projects. Supportthree modes: ap, STA, and AP+STA. It supports many chips: arduino UNO and Mega, Raspberry pi, STIM 32, etc.51 mcu, the uno shown in the picture is NOT INCLUDE. Resolution: 128 x 64, power consumption: 0

04w during normal operation, View angle: > 160°, Support voltage: 3.

More information about UCTRONICS U602602 #ad


Similar products



2pcs ADS1115 16 Bits 4 Channel Analog-to-Digital ADC PGA Converter with Programmable Gain Amplifier High Prcision I2C IIC 2.0V to 5.5V Bits ADC Converter Development Board for Arduino and Raspberry

#ad
MakerFocus #ad - An easy to use i2c adc Converter, with Programmable Gain Amplifier. Uctronics 096 inch oled module for showing graphical & textual information directly on your micro-controller projects. 2 × usb 3. This d1 mini module is a mini WIFI board based on ESP-8266EX. This wlan board contains 11 digital input / output pins, all pins have interrupt / I2C / pwm / 1-wire and a micro-USB connection.

Our d1 mini development board is 100% compatible with Arduino WeMos and can be programmed in the Arduino IDE. Operating temperature: -25 C ~ +70 C. High precision ads1115 16 bit 4 Channel Analog-to-Digital ADC Converter. Wide supply range: 2. 0v to 5. 5v bits of resolution, offered in an ultra-small and leadless technology.

2pcs ADS1115 16 Bits 4 Channel Analog-to-Digital ADC PGA Converter with Programmable Gain Amplifier High Prcision I2C IIC 2.0V to 5.5V Bits ADC Converter Development Board for Arduino and Raspberry #ad - Continuous mode: only 150μa is easy to implement, single mode: auto power off function, onboard reference and oscillator. Especially a good tool for the raspberry pi, there is no analog GPIO pin; Easy to use I2C ADC Converter, with Programmable Gain Amplifier. The ads1115 is measured at high resolution and has an input multiplexer MUX that provides two programmble conparator differentials or four single-ended input; Four single-ended or ±256mV, allowing both large and small signals to be the differential input.

Product parameter adc bit rate: 16 bit interface type: i2c size: 2mm* 1, 5mm* 0, 4mm Channels: 4 Channel AN0 AN1 AN2 AN3 Input voltage: 2. 0v-5.

More information about MakerFocus #ad


Similar products